2
0
forked from Ivasoft/openwrt

ar71xx: add support for Rockeetech AP531B0

Specification:
- SoC: Qualcomm Atheros QCA9531 (650/400/216 MHz (CPU/DDR/AHB))
- RAM: 64 MiB DDR2
- Storage: 16 MiB of flash (optional 16 MiB second flash)
- Wireless: built into QCA9531 (Honey Bee), PHY modes b/g/n
- Ethernet: 1x100M (port0) 1x100M (port 4)
- PCI-E: x1
- SIMcard slot: x1
- USB 2.0 port: x1 (optional)
- Ext GPIO pin: x8
- UART for serial console: x1
- External watchdog: x1 (optional)
- Power supply: 9-48V (DC jack/passive PoE)

Installation through tftp:
- Copy <Firmware Image Name> into tftp directory
- Connect board via ttl port and Ethernet port
- Boot the AP531B0
- When "Autobooting in 1 seconds" appears press Enter
- Set serverip and ipaddr appropriate
  (e.g. setenv serverip 192.168.88.10;setenv ipaddr 192.168.88.1)
- Enter "tftp 0x8050000 <Firmware Image Name>"
- Enter "erase 0x9f050000 +$filesize"
- Enter "cp.b 0x80500000 0x9f050000 $filesize"
- Enter "reset"

Signed-off-by: Shuanglin Liu <roboidler@gmail.com>
This commit is contained in:
Shuanglin Liu
2017-03-03 01:23:50 +08:00
committed by Piotr Dymacz
parent 3183015e1e
commit 53ef20f65a
12 changed files with 148 additions and 4 deletions

View File

@@ -183,6 +183,18 @@ config ATH79_MACH_AP152
select ATH79_DEV_WMAC
select ATH79_DEV_AP9X_PCI if PCI
config ATH79_MACH_AP531B0
bool "Rockeetech AP531B0 support"
select SOC_QCA953X
select ATH79_DEV_AP9X_PCI if PCI
select ATH79_DEV_ETH
select ATH79_DEV_GPIO_BUTTONS
select ATH79_DEV_LEDS_GPIO
select ATH79_DEV_M25P80
select ATH79_DEV_SPI
select ATH79_DEV_USB
select ATH79_DEV_WMAC
config ATH79_MACH_AP90Q
bool "YunCore AP90Q support"
select SOC_QCA953X