forked from Ivasoft/openwrt
ipq40xx: add support for EnGenius EMD1
SOC: IPQ4018 / QCA Dakota CPU: Quad-Core ARMv7 Processor rev 5 (v7l) Cortex-A7 DRAM: 256 MiB NOR: 32 MiB ETH: Qualcomm Atheros QCA8072 (1 port) WLAN1: Qualcomm Atheros QCA4018 2.4GHz 802.11bgn 2:2x2 WLAN2: Qualcomm Atheros QCA4018 5GHz 802.11a/n/ac 2:2x2 INPUT: RESET Button LEDS: White, Blue, Red, Orange Flash instruction: From EnGenius firmware to OpenWrt firmware: In Firmware Upgrade page, upgrade your openwrt-ipq40xx-generic-engenius_emd1-squashfs-factory.bin directly. From OpenWrt firmware to EnGenius firmware: 1. Setup a TFTP server on your computer and configure static IP to 192.168.99.8 Put the EnGenius firmware in the TFTP server directory on your computer. 2. Power up EMD1. Press 4 and then press any key to enter u-boot. 3. Download EnGenius firmware (IPQ40xx) # tftpboot 0x84000000 openwrt-ipq40xx-emd1-nor-fw-s.img 4. Flash the firmware (IPQ40xx) # imgaddr=0x84000000 && source 0x84000000:script 5. Reboot (IPQ40xx) # reset Signed-off-by: Yen-Ting-Shen <frank.shen@senao.com> [removed BOARD_NAME] Signed-off-by: Christian Lamparter <chunkeey@gmail.com>
This commit is contained in:
committed by
Christian Lamparter
parent
52b8c7a892
commit
51f3035978
@@ -49,6 +49,7 @@ ipq40xx_setup_interfaces()
|
||||
avm,fritzrepeater-1200|\
|
||||
dlink,dap-2610 |\
|
||||
engenius,eap1300|\
|
||||
engenius,emd1|\
|
||||
meraki,mr33|\
|
||||
netgear,ex6100v2|\
|
||||
netgear,ex6150v2|\
|
||||
@@ -108,6 +109,10 @@ ipq40xx_setup_macs()
|
||||
lan_mac=$(mtd_get_mac_ascii bdcfg lanmac)
|
||||
label_mac=$lan_mac
|
||||
;;
|
||||
engenius,emd1)
|
||||
lan_mac=$(mtd_get_mac_ascii 0:APPSBLENV ethaddr)
|
||||
label_mac=$lan_mac
|
||||
;;
|
||||
engenius,ens620ext)
|
||||
wan_mac=$(mtd_get_mac_ascii u-boot-env ethaddr)
|
||||
lan_mac=$(macaddr_add "$wan_mac" 1)
|
||||
|
||||
Reference in New Issue
Block a user