SW/openwrt
2
0
Fork 0
forked from Ivasoft/openwrt
Code Pull Requests Activity

lantiq: add Netgear DM200 support

Browse Source 
Netgear DM200 is an inexpensive VDSL modem:

    CPU: VRX220 MIPS 34Kc 5.6 @ 500Mhz
    RAM: 64MiB
    Flash: 8MiB
    Ethernet: 1x100M
    DSL: VDSL2+, ADSL2+
    reset button, 3x bi-color LEDs

Serial port is 115200 baud, on the 4 pin header; pins from the bottom to
top are GND, RX, TX.

To upgrade from the vendor firmware, upload factory.img

The DM200 bootloader supports flashing over TFTP; hold the reset button
while powering on the device, and wait for the power light to start
flashing green before releasing. The device is now listening on
192.168.0.1/24, and can be sent a factory.img or a netgear image with a
TFTP put.

Once the image is loaded, it will be written to the flash, and the
device will reboot; this will take a few minutes.

Thanks to Edward O'Callaghan and Baptiste Jonglez, who implemented their
own ports for this device and provided valuable feedback.

Signed-off-by: Thomas Nixon <tom@tomn.co.uk>
This commit is contained in:
Thomas Nixon
2017-04-23 22:07:17 +01:00
committed by Mathias Kresin
parent 08cd5b769d
commit 50e3659703
4 changed files with 234 additions and 0 deletions
Download Patch File Download Diff File Expand all files Collapse all files

3
target/linux/lantiq/base-files/etc/board.d/01_leds
View File

@@ -50,6 +50,9 @@ ARV7519RW22)
BTHOMEHUBV5A)
ucidef_set_led_default "dimmed" "dimmed" "dimmed" "0"
;;
DM200)
ucidef_set_led_netdev "lan" "lan" "dm200:green:lan" "eth0"
;;
FRITZ7320)
ucidef_set_led_netdev "wifi" "wifi" "fritz7320:green:wlan" "wlan0"
;;

6
target/linux/lantiq/base-files/etc/board.d/02_network
View File

@@ -100,6 +100,12 @@ DGN3500*)
"0:lan:4" "1:lan:3" "2:lan:2" "3:lan:1" "5t@eth0"
;;
DM200)
lan_mac=$(mtd_get_mac_binary ART 0)
wan_mac=$(macaddr_add "$lan_mac" 1)
ucidef_set_interface_lan 'eth0'
;;
EASY80920NAND|EASY80920NOR)
lan_mac=$(mtd_get_mac_ascii uboot_env ethaddr)
wan_mac=$(macaddr_add "$lan_mac" 1)