SW/openwrt
2
0
Fork 0
forked from Ivasoft/openwrt
Code Pull Requests Activity

ramips: add support for Ubiquiti UniFi nanoHD

Browse Source 
Hardware
--------
SoC:   MediaTek MT7621AT
WiFi:  MediaTek MT7603 bgn 2T2R
       MediaTek MT7615 ac  4T4R
Flash: 32M SPI (Macronix MX25L25635F)
RAM:   128M DDR3 (Winbond W631GG6KB)
LED:   Dome (Blue / White)
BTN:   Reset

Installation
------------

These instructions were written for firmware version v3.9.27.
Downgrade if necessary.

1. Copy the OpenWrt sysupgrade image to the devices /tmp folder
   via scp. On factory defaults, user and password is "ubnt" at
   192.168.1.20/24.

2. Write the bootselect flag. Otherwise, the device might boot from the
   wrong partition. Verify the mtd partition used in the command below
   is the one labled "bs" in /proc/mtd (as this might change in the
   future).

   > dd if=/dev/zero bs=1 count=1 of=/dev/mtd4

3. Write the OpenWrt sysupgrade to the mtd partitions labled
   "kernel0" and "kernel1".

   > dd if=/tmp/openwrt-sysupgrade.bin of=/dev/mtdblock6
   > dd if=/tmp/openwrt-sysupgrade.bin of=/dev/mtdblock7

4. Reboot or powercycle the device.

Signed-off-by: David Bauer <mail@david-bauer.net>
This commit is contained in:
David Bauer
2020-03-08 21:39:19 +01:00
parent 0c4d91f121
commit 4c8446bf39
3 changed files with 151 additions and 1 deletions
Download Patch File Download Diff File Expand all files Collapse all files

3
target/linux/ramips/mt7621/base-files/etc/board.d/02_network
View File

@@ -129,7 +129,8 @@ ramips_setup_interfaces()
;;
netgear,ex6150|\
tplink,re350-v1|\
tplink,re650-v1)
tplink,re650-v1|\
ubnt,unifi-nanohd)
ucidef_add_switch "switch0" \
"0:lan" "6@eth0"
;;