SW/openwrt
2
0
Fork 0
forked from Ivasoft/openwrt
Code Pull Requests Activity

ipq807x: add initial support for prpl Foundation Haze board

Browse Source 
Haze is prpl Foundation's reference board (WNC LVRP).

Board info:

 - IPQ8072A SoC
 - 2 GiB RAM
 - 4 GiB eMMC
 - 8MiB SPI NOR (MX25U6435F)

 - 3x 1GigE ports (QCA8075)
 - 1x 10GigE port (AQR113C)
 - 1x SFP cage

 - WiFi 6GHz 160MHz (QCN9074)
 - WiFi 5GHz 80+80MHz (QCN5054)
 - WiFi 2.4G (QCN5024)

 - ARM Standard 20-pin 2.54mm/0.1" JTAG (1V8 !!!)
 - Bluetooth v5.0 + EDR with integrated Class 1 PA (CYW20704)
 - 1x M.2 B-key socket with PCIe 3.0
 - 1x USB 3.0 port
 - UART marked J6 is 4-pin 2.54mm/0.1" connector 3V3(arrow),RX,TX,GND (115200 8N1)
 - Reset and WPS buttons

Flashing instructions:

 1. From U-Boot boot OpenWrt using initramfs image:

    IPQ807x# tftpboot openwrt-ipq807x-generic-prpl_haze-initramfs-uImage.itb && bootm

 2. In OpenWrt running from initramfs execute sysupgrade:

    root@OpenWrt:/# sysupgrade -n /tmp/openwrt-ipq807x-generic-prpl_haze-squashfs-sysupgrade.bin

Work in progress/known issues:

 * SFP feature not implemented/tested
 * M.2 feature not implemented/tested
 * Bluetooth feature not implemented/tested
 * 6GHz wireless should be working, but not tested
 * MAC address assigments for LAN interfaces

Signed-off-by: Petr Štetiar <ynezz@true.cz>
(cherry picked from commit 2e910039dd)
This commit is contained in:
Petr Štetiar
2023-06-05 12:13:04 +02:00
parent 7e6403a966
commit 41af35cf6b
6 changed files with 336 additions and 1 deletions
Download Patch File Download Diff File Expand all files Collapse all files

9
target/linux/ipq807x/base-files/etc/hotplug.d/firmware/11-ath11k-caldata
View File

@@ -21,10 +21,17 @@ case "$FIRMWARE" in
zyxel,nbg7815)
caldata_extract "0:art" 0x1000 0x20000
;;
prpl,haze)
caldata_extract_mmc "0:ART" 0x1000 0x20000
;;
esac
;;
"ath11k/QCN9074/hw1.0/cal-pci-0000:01:00.0.bin")
"ath11k/QCN9074/hw1.0/cal-pci-0000:01:00.0.bin"|\
"ath11k/QCN9074/hw1.0/cal-pci-0001:01:00.0.bin")
case "$board" in
prpl,haze)
caldata_extract_mmc "0:ART" 0x26800 0x20000
;;
xiaomi,ax9000)
caldata_extract "0:art" 0x26800 0x20000
;;