SW/openwrt
2
0
Fork 0
forked from Ivasoft/openwrt
Code Pull Requests Activity

ipq806x: base-files: add support for Linksys EA8500

Browse Source 
Signed-off-by: Adrian Panella <ianchi74@outlook.com>
This commit is contained in:
Adrian Panella
2016-05-13 01:13:15 -05:00
committed by John Crispin
parent 2adc6468bf
commit 3d067c0132
8 changed files with 142 additions and 0 deletions
Download Patch File Download Diff File Expand all files Collapse all files

4
target/linux/ipq806x/base-files/etc/board.d/01_leds
View File

@@ -27,6 +27,10 @@ r7500)
ucidef_set_led_default "wps" "WPS" "r7500:white:wps" "0"
ucidef_set_led_default "rfkill" "rfkill" "r7500:white:rfkill" "0"
;;
ea8500)
ucidef_set_led_wlan "wifi" "WIFI" "ea8500:green:wifi" "phy0radio"
ucidef_set_led_default "wps" "WPS" "ea8500:green:wps" "0"
;;
*)
;;
esac

9
target/linux/ipq806x/base-files/etc/board.d/02_network
View File

@@ -6,6 +6,7 @@
. /lib/functions/uci-defaults.sh
. /lib/ipq806x.sh
. /lib/functions/system.sh
board_config_update
@@ -24,6 +25,14 @@ db149)
ucidef_add_switch "switch0" \
"1:lan" "2:lan" "3:lan" "4:lan" "6@eth1" "5:wan" "0@eth0"
;;
ea8500)
hw_mac_addr=$(mtd_get_mac_ascii devinfo hw_mac_addr)
ucidef_add_switch "switch0" \
"1:lan" "2:lan" "3:lan" "4:lan" "0t@eth0" "5:wan" "0t@eth0"
ucidef_set_interface_macaddr "lan" "$hw_mac_addr"
ucidef_set_interface_macaddr "wan" "$hw_mac_addr"
;;
*)
echo "Unsupported hardware. Network interfaces not intialized"
;;

3
target/linux/ipq806x/base-files/etc/diag.sh
View File

@@ -8,6 +8,9 @@ get_status_led() {
c2600)
status_led="status:blue"
;;
ea8500)
status_led="ea8500:white:power"
;;
esac
}

8
target/linux/ipq806x/base-files/etc/hotplug.d/firmware/11-ath10k-caldata
View File

@@ -52,6 +52,10 @@ case "$FIRMWARE" in
ath10kcal_extract "radio" 4096 12064
# ath10kcal_patch_mac $(macaddr_add $(mtd_get_mac_binary default-mac 8) -1)
;;
ea8500)
hw_mac_addr=$(mtd_get_mac_ascii devinfo hw_mac_addr)
ath10kcal_extract "art" 4096 12064
;;
esac
;;
"ath10k/cal-pci-0001:01:00.0.bin")
@@ -60,6 +64,10 @@ case "$FIRMWARE" in
ath10kcal_extract "radio" 20480 12064
# ath10kcal_patch_mac $(macaddr_add $(mtd_get_mac_binary default-mac 8) -2)
;;
ea8500)
hw_mac_addr=$(mtd_get_mac_ascii devinfo hw_mac_addr)
ath10kcal_extract "art" 20480 12064
;;
esac
;;
*)

20
target/linux/ipq806x/base-files/etc/init.d/linksys_recovery Executable file
View File

@@ -0,0 +1,20 @@
#!/bin/sh /etc/rc.common
# Copyright (C) 2015 OpenWrt.org
START=97
boot() {
. /lib/functions.sh
. /lib/ipq806x.sh
case $(ipq806x_board_name) in
ea8500)
# make sure auto_recovery in uboot is always on
AUTO_RECOVERY_ENA="`fw_printenv -n auto_recovery`"
if [ "$AUTO_RECOVERY_ENA" != "yes" ] ; then
fw_setenv auto_recovery yes
fi
# reset the boot counter
mtd resetbc s_env
;;
esac
}