SW/openwrt
2
0
Fork 0
forked from Ivasoft/openwrt
Code Pull Requests Activity

ramips: add support for TP-Link Archer AX23 v1

Browse Source 
Hardware
--------
CPU:    MediaTek MT7621 DAT
RAM:    128MB DDR3 (integrated)
FLASH:  16MB SPI-NOR ()
WiFi:   MediaTek MT7905 + MT7975 (2.4 / 5 DBDC) 802.11ax
SERIAL: 115200 8N1
        LEDs - (3V3 - GND - RX - TX) - ETH ports

Installation
------------

Upload the factory image using the Web-UI.

Web-Recovery
------------

The router supports a HTTP recovery mode by holding the reset-button
when powering on. The interface is reachable at 192.168.0.1 and supports
installation using the factory image.

Signed-off-by: David Bauer <mail@david-bauer.net>
(cherry picked from commit 7dceef5ee5)
This commit is contained in:
David Bauer
2023-03-14 02:06:40 +01:00
parent a507243bfe
commit 3c6692ba03
4 changed files with 223 additions and 0 deletions
Download Patch File Download Diff File Expand all files Collapse all files

1
target/linux/ramips/mt7621/base-files/etc/board.d/01_leds
View File

@@ -112,6 +112,7 @@ oraybox,x3a)
ucidef_set_led_netdev "lan" "lan link" "green:status" "br-lan"
;;
tplink,archer-a6-v3|\
tplink,archer-ax23-v1|\
tplink,archer-c6-v3|\
tplink,archer-c6u-v1)
ucidef_set_led_netdev "lan" "LAN" "green:lan" "br-lan"

7
target/linux/ramips/mt7621/base-files/etc/hotplug.d/ieee80211/10_fix_wifi_mac
View File

@@ -98,6 +98,13 @@ case "$board" in
hw_mac_addr="$(mtd_get_mac_binary factory 0x4)"
[ "$PHYNBR" = "1" ] && macaddr_add $hw_mac_addr "0x100000" > /sys${DEVPATH}/macaddress
;;
tplink,archer-ax23-v1)
hw_mac_addr="$(mtd_get_mac_binary config 0x8)"
# 2.4 GHz MAC is MAC in EEPROm while 5GHz is EEPROM_MAC -1
# However, mac80211 assigns consecutive addresses for each VAP
# Which leads to conflicting addresses. Set the LA bit for 5Ghz instead.
[ "$PHYNBR" = "1" ] && macaddr_setbit_la "$hw_mac_addr" > "/sys${DEVPATH}/macaddress"
;;
tplink,eap615-wall-v1)
hw_mac_addr="$(mtd_get_mac_binary product-info 0x8)"
macaddr_add "$hw_mac_addr" "$PHYNBR" > "/sys${DEVPATH}/macaddress"