forked from Ivasoft/openwrt
ar8216: add swconfig attribute to display ARL table on AR8327/AR8337
Add global read-only swconfig attribute "arl_table" to display the address resolution table. So far the chip-specific part is implemented for AR8327/AR8337 only as I don't have the datasheets for the other AR8XXX chips. Successfully tested on TL-WDR4300 (AR8327rev2) and TL-WDR4900 (AR8327rev4). Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com> SVN-Revision: 44104
This commit is contained in:
@@ -114,8 +114,29 @@
|
||||
#define AR8327_PORT_VLAN1_OUT_MODE_UNTOUCH 3
|
||||
|
||||
#define AR8327_REG_ATU_DATA0 0x600
|
||||
#define AR8327_ATU_ADDR0 BITS(0, 8)
|
||||
#define AR8327_ATU_ADDR0_S 0
|
||||
#define AR8327_ATU_ADDR1 BITS(8, 8)
|
||||
#define AR8327_ATU_ADDR1_S 8
|
||||
#define AR8327_ATU_ADDR2 BITS(16, 8)
|
||||
#define AR8327_ATU_ADDR2_S 16
|
||||
#define AR8327_ATU_ADDR3 BITS(24, 8)
|
||||
#define AR8327_ATU_ADDR3_S 24
|
||||
#define AR8327_REG_ATU_DATA1 0x604
|
||||
#define AR8327_ATU_ADDR4 BITS(0, 8)
|
||||
#define AR8327_ATU_ADDR4_S 0
|
||||
#define AR8327_ATU_ADDR5 BITS(8, 8)
|
||||
#define AR8327_ATU_ADDR5_S 8
|
||||
#define AR8327_ATU_PORTS BITS(16, 7)
|
||||
#define AR8327_ATU_PORT0 BIT(16)
|
||||
#define AR8327_ATU_PORT1 BIT(17)
|
||||
#define AR8327_ATU_PORT2 BIT(18)
|
||||
#define AR8327_ATU_PORT3 BIT(19)
|
||||
#define AR8327_ATU_PORT4 BIT(20)
|
||||
#define AR8327_ATU_PORT5 BIT(21)
|
||||
#define AR8327_ATU_PORT6 BIT(22)
|
||||
#define AR8327_REG_ATU_DATA2 0x608
|
||||
#define AR8327_ATU_STATUS BITS(0, 4)
|
||||
|
||||
#define AR8327_REG_ATU_FUNC 0x60c
|
||||
#define AR8327_ATU_FUNC_OP BITS(0, 4)
|
||||
|
||||
Reference in New Issue
Block a user