SW/openwrt
2
0
Fork 0
forked from Ivasoft/openwrt
Code Pull Requests Activity

kirkwood: add support for Ctera C200 V1 NAS

Browse Source 
2-Bay NAS - maximum two 3.5" Harddisks

Hardware:
  - SoC: Marvell 88F6281-A1 ARMv5TE Processor 1.2GHz
  - Ram: 512MB (4x Nanya NT5TU128M8GE-AC)
  - NAND Flash: 256MB (Samsung 216 K9F2G08U0C)
  - Lan: 1x GBE (Marvell 88E1116R-NNC1)
  - Storage: 2x SATA HDD 3.5" Slot
  - USB: 2x USB 2.0 port
  - Console: Internal J3 connector (1: Vcc, 2: Rx, 3: Tx, 4: GND)
  - LEDs: 13x GPIO controlled
  - Buttons: 2x GPIO controlled

Known issues:
  - Buzzer is unused due lack of proper driver

Installation:
  - Apply factory initramfs image via stock web-gui.
  - Do sysupgrade to make installation complete.

Back to stock:
  - OpenWrt rootfs partition use unused space after stock firmware.
  - Full revert is possible.
  - Login via ssh and run: ctera_c200-v1_back_to_factory

Signed-off-by: Pawel Dembicki <paweldembicki@gmail.com>
Reviewed-by: Sungbo Eo <mans0n@gorani.run>
[apply sorting to device recipe]
Signed-off-by: Sungbo Eo <mans0n@gorani.run>
This commit is contained in:
Pawel Dembicki
2021-08-16 17:42:56 +02:00
committed by Sungbo Eo
parent e22c91e144
commit 3843c641d8
6 changed files with 421 additions and 1 deletions
Download Patch File Download Diff File Expand all files Collapse all files

13
target/linux/kirkwood/base-files/lib/upgrade/platform.sh
View File

@@ -1,4 +1,4 @@
RAMFS_COPY_BIN='fw_printenv fw_setenv'
RAMFS_COPY_BIN='fw_printenv fw_setenv strings'
RAMFS_COPY_DATA='/etc/fw_env.config /var/lock/fw_printenv.lock'
REQUIRE_IMAGE_METADATA=1
@@ -11,6 +11,17 @@ platform_do_upgrade() {
local board="$(board_name)"
case "$board" in
ctera,c200-v1)
part=$(find_mtd_part "active_bank")
if [ -n "$part" ]; then
CI_KERNPART="$(strings $part | grep bank)"
nand_do_upgrade "$1"
else
echo "active_bank partition missed!"
return 1
fi
;;
linksys,e4200-v2|\
linksys,ea3500|\
linksys,ea4500)