SW/openwrt
2
0
Fork 0
forked from Ivasoft/openwrt
Code Pull Requests Activity

kirkwood: add support for Ctera C200 V1 NAS

Browse Source 
2-Bay NAS - maximum two 3.5" Harddisks

Hardware:
  - SoC: Marvell 88F6281-A1 ARMv5TE Processor 1.2GHz
  - Ram: 512MB (4x Nanya NT5TU128M8GE-AC)
  - NAND Flash: 256MB (Samsung 216 K9F2G08U0C)
  - Lan: 1x GBE (Marvell 88E1116R-NNC1)
  - Storage: 2x SATA HDD 3.5" Slot
  - USB: 2x USB 2.0 port
  - Console: Internal J3 connector (1: Vcc, 2: Rx, 3: Tx, 4: GND)
  - LEDs: 13x GPIO controlled
  - Buttons: 2x GPIO controlled

Known issues:
  - Buzzer is unused due lack of proper driver

Installation:
  - Apply factory initramfs image via stock web-gui.
  - Do sysupgrade to make installation complete.

Back to stock:
  - OpenWrt rootfs partition use unused space after stock firmware.
  - Full revert is possible.
  - Login via ssh and run: ctera_c200-v1_back_to_factory

Signed-off-by: Pawel Dembicki <paweldembicki@gmail.com>
Reviewed-by: Sungbo Eo <mans0n@gorani.run>
[apply sorting to device recipe]
Signed-off-by: Sungbo Eo <mans0n@gorani.run>
This commit is contained in:
Pawel Dembicki
2021-08-16 17:42:56 +02:00
committed by Sungbo Eo
parent e22c91e144
commit 3843c641d8
6 changed files with 421 additions and 1 deletions
Download Patch File Download Diff File Expand all files Collapse all files

7
target/linux/kirkwood/base-files/etc/init.d/hwmon_fancontrol
View File

@@ -7,6 +7,13 @@ boot() {
# for more information, please read https://www.kernel.org/doc/Documentation/hwmon/sysfs-interface
case $(board_name) in
ctera,c200-v1)
path_to_hwmon='/sys/devices/platform/ocp@f1000000/f1011000.i2c/i2c-0/0-004c/hwmon/hwmon0'
# It should be related to hdd temerature instead lm63 temp
echo 1 > "$path_to_hwmon/pwm1_enable"
echo 128 > "$path_to_hwmon/pwm1"
;;
iom,ix2-200)
path_to_hwmon='/sys/class/hwmon/hwmon0'
echo 2 > "$path_to_hwmon/pwm1_enable" # fan is on pwm1