SW/openwrt
2
0
Fork 0
forked from Ivasoft/openwrt
Code Pull Requests Activity

ath79: add support for D-Link DAP-1330/DAP-1365 A1

Browse Source 
Port device support for DAP-1330 from the ar71xx target to ath79.

Additionally, images are generated for the European through-socket
case variant DAP-1365. Both devices run the same vendor firmware, the
only difference being the DAP_SIGNATURE field in the factory header.
The vendor's Web UI will display a model string stored in the flash.

Specifications:

 * QCA9533, 8 MiB Flash, 64 MiB RAM
 * One Ethernet Port (10/100)
 * Wall-plug style case (DAP-1365 with additional socket)
 * LED bargraph RSSI indicator

Installation:

 * Web UI: http://192.168.0.50 (or different address obtained via DHCP)
   There is no password set by default
 * Recovery Web UI: Keep reset button pressed during power-on
   until LED starts flashing red, upgrade via http://192.168.0.50
 * Some modern browsers may have problems flashing via the Web UI,
   if this occurs consider booting to recovery mode and flashing via:
   curl -F \
     files=@openwrt-ath79-generic-dlink_dap-1330-a1-squashfs-factory.bin \
     http://192.168.0.50/cgi/index

The device will use the same MAC address for both wired and wireless
interfaces, however it is stored at two different locations in the flash.

Signed-off-by: Sebastian Schaper <openwrt@sebastianschaper.net>
This commit is contained in:
Sebastian Schaper
2020-06-03 21:15:09 +02:00
committed by Petr Štetiar
parent 358aec7775
commit 361c670a46
8 changed files with 196 additions and 3 deletions
Download Patch File Download Diff File Expand all files Collapse all files

8
target/linux/ath79/generic/base-files/etc/board.d/01_leds
View File

@@ -132,6 +132,14 @@ compex,wpj531-16m)
devolo,magic-2-wifi)
ucidef_set_led_netdev "plcw" "dLAN" "devolo:white:dlan" "eth0.1" "rx"
;;
dlink,dap-1330-a1|\
dlink,dap-1365-a1)
ucidef_set_rssimon "wlan0" "200000" "1"
ucidef_set_led_rssi "rssilow" "RSSILOW" "d-link:red:rssilow" "wlan0" "1" "25"
ucidef_set_led_rssi "rssimediumlow" "RSSIMEDIUMLOW" "d-link:green:rssimediumlow" "wlan0" "1" "100"
ucidef_set_led_rssi "rssimediumhigh" "RSSIMEDIUMHIGH" "d-link:green:rssimediumhigh" "wlan0" "51" "100"
ucidef_set_led_rssi "rssihigh" "RSSIHIGH" "d-link:green:rssihigh" "wlan0" "76" "100"
;;
dlink,dir-859-a1)
ucidef_set_led_switch "internet" "WAN" "$boardname:green:internet" "switch0" "0x20"
;;

10
target/linux/ath79/generic/base-files/etc/board.d/02_network
View File

@@ -23,6 +23,8 @@ ath79_setup_interfaces()
devolo,dvl1750c|\
devolo,dvl1750i|\
devolo,dvl1750x|\
dlink,dap-1330-a1|\
dlink,dap-1365-a1|\
dlink,dir-505|\
engenius,ecb1750|\
enterasys,ws-ap3705i|\
@@ -386,13 +388,15 @@ ath79_setup_macs()
devolo,magic-2-wifi)
label_mac=$(macaddr_add "$(mtd_get_mac_binary art 0x1002)" 3)
;;
dlink,dap-2695-a1)
label_mac=$(mtd_get_mac_ascii bdcfg "wlanmac")
;;
dlink,dap-1330-a1|\
dlink,dap-1365-a1|\
dlink,dch-g020-a1)
lan_mac=$(mtd_get_mac_text "mp" 0x1)
label_mac=$lan_mac
;;
dlink,dap-2695-a1)
label_mac=$(mtd_get_mac_ascii bdcfg "wlanmac")
;;
dlink,dir-825-b1)
lan_mac=$(mtd_get_mac_text "caldata" 0xffa0)
wan_mac=$(mtd_get_mac_text "caldata" 0xffb4)