SW/openwrt
2
0
Fork 0
forked from Ivasoft/openwrt
Code Pull Requests Activity

lantiq: split base-files into subtargets

Browse Source 
This splits the device-dependent base-files into subtarget directories,
like done recently for ath79 and ramips. While this increases the
overall lines of codes, it will make the code per subtarget smaller
and easier to keep track of features and devices.

While at it, several variables at the top of 02_network are removed,
as they were never changed. The values are put directly into the
function calls where they are used.

Remove unneeded LED setup from 01_leds, and remove 01_leds entirely
for falcon subtarget (as it is not used there).

Applies alphabetic reordering to device cases in base-files.

Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
This commit is contained in:
Adrian Schmutzler
2019-12-17 01:15:35 +01:00
parent b070101c50
commit 355f0444f3
17 changed files with 533 additions and 224 deletions
Download Patch File Download Diff File Expand all files Collapse all files

56
target/linux/lantiq/xway/base-files/etc/hotplug.d/firmware/12-ath9k-eeprom Normal file
View File

@@ -0,0 +1,56 @@
#!/bin/sh
[ -e /lib/firmware/$FIRMWARE ] && exit 0
. /lib/functions/caldata.sh
caldata_extract_swap() {
local part=$1
local offset=$2
local count=$3
local mtd
mtd=$(find_mtd_chardev $part)
[ -n "$mtd" ] || caldata_die "no mtd device found for partition $part"
offset=$(($offset / 2))
count=$(($count / 2))
dd if=$mtd of=/lib/firmware/$FIRMWARE bs=2 skip=$offset count=$count conv=swab 2>/dev/null || \
caldata_die "failed to extract calibration data from $mtd"
}
case "$FIRMWARE" in
"ath9k-eeprom-pci-0000:00:0e.0.bin" | \
"ath9k-eeprom-pci-0000:01:00.0.bin" | \
"ath9k-eeprom-pci-0000:02:00.0.bin")
board=$(board_name)
case "$board" in
arcadyan,arv7518pw)
caldata_extract_swap "boardconfig" 0x400 0x1000
;;
arcadyan,arv8539pw22)
caldata_extract_swap "art" 0x400 0x1000
;;
bt,homehub-v2b)
caldata_extract_swap "art" 0x0 0x1000
ath9k_patch_mac_crc "00:00:00:00:00:00" 0x20c
;;
bt,homehub-v3a)
caldata_extract_swap "art-copy" 0x0 0x1000
ath9k_patch_mac_crc $(macaddr_add $(mtd_get_mac_ascii uboot_env ethaddr) +2) 0x10c
;;
netgear,dgn3500|netgear,dgn3500b)
caldata_extract "calibration" 0xf000 0x1000
ath9k_patch_mac_crc $(macaddr_add $(mtd_get_mac_ascii uboot-env ethaddr) +2) 0x20c
;;
avm,fritz7312|avm,fritz7320)
caldata_extract "urlader" 0x985 0x1000
;;
*)
caldata_die "board $board is not supported yet"
;;
esac
;;
esac