SW/openwrt
2
0
Fork 0
forked from Ivasoft/openwrt
Code Pull Requests Activity

ramips: add support for Belkin RT1800

Browse Source 
Belkin RT1800 is an 802.11ax (Wi-Fi 6) router, based on MediaTek
MT7621A.

Specifications:
- SoC: MT7621 (880MHz, 2 Cores)
- RAM: 256 MB
- Flash: 128 MB NAND
- Wi-Fi:
  - MT7915D: 2.4/5 GHz (DBDC)
- Ethernet: 5x 1GiE MT7530
- USB: 1x USB 3.0
- UART: J4 (57600 baud)
  - Pinout: [3V3] (TXD) (RXD) (blank) (GND)

Notes:
* This device has a dual-boot partition scheme, but this firmware works
  only on boot partition 1.

Installation:

Upload the generated factory.bin image via the stock web firmware
updater.

Signed-off-by: Rosen Penev <rosenp@gmail.com>
This commit is contained in:
Rosen Penev
2021-03-22 14:06:14 -07:00
committed by Hauke Mehrtens
parent fe609889e2
commit 26a6a6a60b
8 changed files with 226 additions and 0 deletions
Download Patch File Download Diff File Expand all files Collapse all files

3
target/linux/ramips/mt7621/base-files/etc/board.d/01_leds
View File

@@ -28,6 +28,9 @@ beeline,smartbox-giga|\
beeline,smartbox-turbo)
ucidef_set_led_netdev "wan" "wan" "blue:wan" "wan"
;;
belkin,rt1800)
ucidef_set_led_netdev "wan" "wan" "white:wan" "wan"
;;
cudy,wr2100)
ucidef_set_led_netdev "lan1" "lan1" "green:lan1" "lan1"
ucidef_set_led_netdev "lan2" "lan2" "green:lan2" "lan2"

5
target/linux/ramips/mt7621/base-files/etc/board.d/02_network
View File

@@ -205,6 +205,11 @@ ramips_setup_macs()
wan_mac=$lan_mac
label_mac=$lan_mac
;;
belkin,rt1800)
lan_mac=$(mtd_get_mac_ascii Config lan_hwaddr)
wan_mac=$(mtd_get_mac_ascii Config wan_hwaddr)
label_mac=$lan_mac
;;
mikrotik,routerboard-750gr3|\
mikrotik,routerboard-760igs|\
mikrotik,routerboard-m11g|\

5
target/linux/ramips/mt7621/base-files/etc/hotplug.d/ieee80211/10_fix_wifi_mac
View File

@@ -84,6 +84,11 @@ case "$board" in
[ "$PHYNBR" = "0" ] && macaddr_add $hw_mac_addr 1 > /sys${DEVPATH}/macaddress
[ "$PHYNBR" = "1" ] && macaddr_add $hw_mac_addr 2 > /sys${DEVPATH}/macaddress
;;
belkin,rt1800)
hw_mac_addr=$(mtd_get_mac_ascii Config wan_hwaddr)
[ "$PHYNBR" = "0" ] && macaddr_add $hw_mac_addr 1 > /sys${DEVPATH}/macaddress
[ "$PHYNBR" = "1" ] && macaddr_add $hw_mac_addr 2 > /sys${DEVPATH}/macaddress
;;
netgear,wax202)
hw_mac_addr=$(mtd_get_mac_ascii Config mac)
[ "$PHYNBR" = "0" ] && macaddr_add $hw_mac_addr 2 > /sys${DEVPATH}/macaddress

1
target/linux/ramips/mt7621/base-files/etc/init.d/bootcount
View File

@@ -22,6 +22,7 @@ boot() {
linksys,ea8100-v2)
mtd resetbc s_env || true
;;
belkin,rt1800|\
samknows,whitebox-v8)
fw_setenv bootcount 0
;;

1
target/linux/ramips/mt7621/base-files/lib/upgrade/platform.sh
View File

@@ -57,6 +57,7 @@ platform_do_upgrade() {
beeline,smartbox-flash|\
beeline,smartbox-giga|\
beeline,smartbox-turbo|\
belkin,rt1800|\
dlink,dir-1960-a1|\
dlink,dir-2640-a1|\
dlink,dir-2660-a1|\