SW/openwrt
2
0
Fork 0
forked from Ivasoft/openwrt
Code Pull Requests Activity

ramips: mt7621: add support for NETGEAR WAC104

Browse Source 
NETGEAR WAC104 is an AP based on castrated R6220, without WAN
port and USB.

SoC: MediaTek MT7621ST
RAM: 128M DDR3
FLASH: 128M NAND
WiFi: MediaTek MT7612EN an+ac
MediaTek MT7603EN bgn
ETH: MediaTek MT7621ST (4x LAN)
BTN: 1x Connect (WPS), 1x WLAN, 1x Reset
LED: 7x (3x GPIO controlled)

Installation:

Login to netgear webinterface and flash factory.img

Back to stock:

Use nmrpflash to revert stock image.

Signed-off-by: Pawel Dembicki <paweldembicki@gmail.com>
This commit is contained in:
Pawel Dembicki
2020-06-09 15:16:35 +02:00
committed by Adrian Schmutzler
parent cd09f26660
commit 221d8a1c60
4 changed files with 186 additions and 1 deletions
Download Patch File Download Diff File Expand all files Collapse all files

3
target/linux/ramips/mt7621/base-files/etc/board.d/02_network
View File

@@ -29,7 +29,8 @@ ramips_setup_interfaces()
gnubee,gb-pc2)
ucidef_set_interface_lan "lan1 lan2"
;;
linksys,re6500)
linksys,re6500|\
netgear,wac104)
ucidef_set_interface_lan "lan1 lan2 lan3 lan4"
;;
mikrotik,routerboard-m11g|\