SW/openwrt
2
0
Fork 0
forked from Ivasoft/openwrt
Code Pull Requests Activity

ramips: add support for Netgear WAX202

Browse Source 
Netgear WAX202 is an 802.11ax (Wi-Fi 6) router.

Specifications:
* SoC: MT7621A
* RAM: 512 MiB NT5CC256M16ER-EK
* Flash: NAND 128 MiB F59L1G81MB-25T
* Wi-Fi:
  * MT7915D: 2.4/5 GHz (DBDC)
* Ethernet: 4x 1GbE
  * Switch: SoC built-in
* USB: None
* UART: 115200 baud (labeled on board)

Load addresses (same as ipTIME AX2004M):
* stock
  * 0x80010000: FIT image
  * 0x81001000: kernel image -> entry
* OpenWrt
  * 0x80010000: FIT image
  * 0x82000000: uncompressed kernel+relocate image
  * 0x80001000: relocated kernel image -> entry

Installation:
* Flash the factory image through the stock web interface, or TFTP to
  the bootloader. NMRP can be used to TFTP without opening the case.
* Note that the bootloader accepts both encrypted and unencrypted
  images, while the stock web interface only accepts encrypted ones.

Revert to stock firmware:
* Flash the stock firmware to the bootloader using TFTP/NMRP.

References in WAX202 GPL source:
https://www.downloads.netgear.com/files/GPL/WAX202_V1.0.5.1_Source.rar

* openwrt/target/linux/ramips/dts/mt7621-ax-nand-wax202.dts
  DTS file for this device.

Signed-off-by: Wenli Looi <wlooi@ucalgary.ca>
This commit is contained in:
Wenli Looi
2022-07-02 20:18:59 +00:00
committed by Christian Marangi
parent efca76ffce
commit 0f068e7c4a
6 changed files with 318 additions and 0 deletions
Download Patch File Download Diff File Expand all files Collapse all files

6
target/linux/ramips/mt7621/base-files/etc/board.d/01_leds
View File

@@ -116,6 +116,12 @@ netgear,r7450)
ucidef_set_led_netdev "lan3" "LAN3" "white:lan3" "lan3"
ucidef_set_led_netdev "lan4" "LAN4" "white:lan4" "lan4"
;;
netgear,wax202)
ucidef_set_led_netdev "internet" "Internet" "green:net" "wan"
ucidef_set_led_netdev "lan1" "LAN1" "green:lan1" "lan1"
ucidef_set_led_netdev "lan2" "LAN2" "green:lan2" "lan2"
ucidef_set_led_netdev "lan3" "LAN3" "green:lan3" "lan3"
;;
oraybox,x3a)
ucidef_set_led_netdev "wan" "wan link" "red:status" "wan"
ucidef_set_led_netdev "lan" "lan link" "green:status" "br-lan"

6
target/linux/ramips/mt7621/base-files/etc/board.d/02_network
View File

@@ -27,6 +27,7 @@ ramips_setup_interfaces()
ampedwireless,ally-r1900k|\
gehua,ghl-r-001|\
hiwifi,hc5962|\
netgear,wax202|\
xiaomi,mi-router-3-pro|\
xiaomi,mi-router-ac2100|\
xiaomi,mi-router-cr6606|\
@@ -197,6 +198,11 @@ ramips_setup_macs()
wan_mac=$label_mac
lan_mac=$(macaddr_add $label_mac 1)
;;
netgear,wax202)
lan_mac=$(mtd_get_mac_ascii Config mac)
wan_mac=$(macaddr_add "$lan_mac" 1)
label_mac=$lan_mac
;;
raisecom,msg1500-x-00)
lan_mac=$(mtd_get_mac_ascii Config protest_lan_mac)
wan_mac=$(mtd_get_mac_ascii Config protest_wan_mac)

5
target/linux/ramips/mt7621/base-files/etc/hotplug.d/ieee80211/10_fix_wifi_mac
View File

@@ -76,6 +76,11 @@ case "$board" in
[ "$PHYNBR" = "0" ] && macaddr_add $hw_mac_addr 1 > /sys${DEVPATH}/macaddress
[ "$PHYNBR" = "1" ] && macaddr_add $hw_mac_addr 2 > /sys${DEVPATH}/macaddress
;;
netgear,wax202)
hw_mac_addr=$(mtd_get_mac_ascii Config mac)
[ "$PHYNBR" = "0" ] && macaddr_add $hw_mac_addr 2 > /sys${DEVPATH}/macaddress
[ "$PHYNBR" = "1" ] && macaddr_add $hw_mac_addr 3 > /sys${DEVPATH}/macaddress
;;
oraybox,x3a)
if [ "$PHYNBR" = "1" ]; then
hw_mac_addr="$(mtd_get_mac_binary factory 0x4)"

1
target/linux/ramips/mt7621/base-files/lib/upgrade/platform.sh
View File

@@ -84,6 +84,7 @@ platform_do_upgrade() {
netgear,r7450|\
netgear,wac104|\
netgear,wac124|\
netgear,wax202|\
netis,wf2881|\
raisecom,msg1500-x-00|\
sercomm,na502|\