SW/openwrt
2
0
Fork 0
forked from Ivasoft/openwrt
Code Pull Requests Activity

ramips: add support for TOTOLINK LR1200

Browse Source 
Specifications:
- SoC: MT7628DAN (MT7628AN with 64MB built-in RAM)
- Flash: 8M SPI NOR
- Ethernet: 5x 10/100Mbps
- WiFi: 2.4G: MT7628 built-in
        5G: MT7612E
- 1x miniPCIe slot for LTE modem (only USB pins connected)
- 1x SIM slot

Flash instruction:
U-boot has a builtin web recovery page:
1. Hold the reset button while powering it up
2. Connect to the ethernet and set an IP in 192.168.1.0/24 range
3. Open your browser and upload firmware through http://192.168.1.1

Note about the LTE modem:
If your router comes with an EC25 module and it doesn't show up
as a QMI device, you should do the following to switch it to QMI
mode:
1. Install kmod-usb-serial-option and a terminal software
   (e.g. minicom or screen). All 4 serial ports of the modem
   should be available now.
2. Open /dev/ttyUSB3 with the terminal software and type this
   AT command: AT+QCFG="usbnet",0
3. Power-cycle the router. You should now get a QMI device
   recognized.

Signed-off-by: Chuanhong Guo <gch981213@gmail.com>
This commit is contained in:
Chuanhong Guo
2019-05-16 15:09:07 +08:00
committed by Petr Štetiar
parent 64493d42b4
commit 0ab9f283f7
3 changed files with 165 additions and 0 deletions
Download Patch File Download Diff File Expand all files Collapse all files

1
target/linux/ramips/base-files/etc/board.d/02_network
View File

@@ -120,6 +120,7 @@ ramips_setup_interfaces()
sap-g3200u3|\
sk-wb8|\
telco-electronics,x1|\
totolink,lr1200|\
unielec,u7621-06-256m-16m|\
unielec,u7621-06-512m-64m|\
vr500|\