SW/openwrt
2
0
Fork 0
forked from Ivasoft/openwrt
Code Pull Requests Activity

ramips: add support for Motorola MWR03

Browse Source 
Specifications:
* SOC: MT7628AN + MT7612E
* ROM: 8 MiB Flash
* RAM: 64 MiB DDR2
* WAN: 10/100M *1
* LAN: 10/100M *3
* Button: Reset *1
* LEDs: orange *1, white *1
* Antennas: 2.4 GHz *2 + 5 GHz *2
* TTL Baudrate: 57600
* TFTP Upgrade: IP: 192.168.51.1, Server: 192.168.51.100

MAC addresses as verified by OEM firmware:

use   address   source
2g    *:d8      factory 0x0004 (label)
5g    *:d9      factory 0x8004
LAN   *:d7      factory $label -1
WAN   *:da      factory $label +2

Installation (TFTP + U-Boot):
 * Connect device with a TTL cable and open a serial session by
   PuTTY.
 * Press "2" when booting to select "Load system code then write
   to Flash via TFTP".
 * Configure the IP of local host server.
 * Upload firmware by tftpd64, it will boot when write instruction
   is executed.

Signed-off-by: Shiji Yang <yangshiji66@qq.com>
[fix DTS line endings, fix label MAC address, adjust status LED
 names, convert mtd-mac-address-increment to mac-address-increment]
Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
This commit is contained in:
Shiji Yang
2021-08-24 22:59:59 +08:00
committed by Adrian Schmutzler
parent fcc075e12f
commit 09143282bd
3 changed files with 157 additions and 0 deletions
Download Patch File Download Diff File Expand all files Collapse all files

8
target/linux/ramips/mt76x8/base-files/etc/board.d/02_network
View File

@@ -109,6 +109,10 @@ ramips_setup_interfaces()
ucidef_add_switch "switch0" \
"0:lan" "1:lan" "2:lan" "6@eth0"
;;
motorola,mwr03)
ucidef_add_switch "switch0" \
"1:lan" "2:lan" "3:lan" "0:wan" "6@eth0"
;;
netgear,r6020|\
netgear,r6080|\
netgear,r6120)
@@ -216,6 +220,10 @@ ramips_setup_macs()
mercury,mac1200r-v2)
wan_mac=$(macaddr_add "$(mtd_get_mac_binary factory_info 0xd)" 1)
;;
motorola,mwr03)
label_mac=$(mtd_get_mac_binary factory 0x4)
wan_mac=$(macaddr_add "$label_mac" 2)
;;
onion,omega2|\
onion,omega2p|\
vocore,vocore2|\