SW/openwrt
2
0
Fork 0
forked from Ivasoft/openwrt
Code Pull Requests Activity

ath79: add support for D-Link DIR-842 C1

Browse Source 
Hardware spec of DIR-842 C1:
SoC: QCA9563
DRAM: 128MB DDR2
Flash: 16MB SPI-NOR
Switch: QCA8337N
WiFi 5.8GHz: QCA9888
WiFi 2.4Ghz: QCA9563
USB: circuit onboard, but components are not soldered

Flash instructions:

1. Upgrade the factory.bin through the factory web interface or
   the u-boot failsafe interface.
   The firmware will boot up correctly for the first time.
   Do not power off the device after OpenWrt has booted.
   Otherwise the u-boot will enter failsafe mode as the checksum
   of the firmware has been changed.
2. Upgrade the sysupgrade.bin in OpenWrt.
   After upgrading completes the u-boot won't complain about the
   firmware checksum and it's OK to use now.
3. If you powered off the device before upgrading the sysupgrade.bin,
   just upgrade the factory.bin through the u-boot failsafe interface
   and then goto step 2.

Signed-off-by: Jackson Lim <jackcolentern@gmail.com>
[fix whitespace issues]
Signed-off-by: David Bauer <mail@david-bauer.net>
This commit is contained in:
Jackson Lim
2019-07-25 22:44:11 +08:00
committed by David Bauer
parent 7ed643d205
commit 030fc6ab6c
8 changed files with 207 additions and 144 deletions
Download Patch File Download Diff File Expand all files Collapse all files

2
target/linux/ath79/base-files/etc/board.d/02_network
View File

@@ -115,6 +115,7 @@ ath79_setup_interfaces()
;;
dlink,dir-825-c1|\
dlink,dir-835-a1|\
dlink,dir-842-c1|\
dlink,dir-842-c2|\
dlink,dir-859-a1|\
engenius,epg5000|\
@@ -307,6 +308,7 @@ ath79_setup_macs()
lan_mac=$(mtd_get_mac_text "mac" 4)
wan_mac=$(mtd_get_mac_text "mac" 24)
;;
dlink,dir-842-c1|\
dlink,dir-842-c2|\
dlink,dir-859-a1|\
nec,wg1200cr|\