SW/openwrt
2
0
Fork 0
forked from Ivasoft/openwrt
Code Pull Requests Activity

ar71xx: add support for YunCore AP90Q

Browse Source 
YunCore AP90Q is an outdoor CPE/AP based on Qualcomm/Atheros QCA9531 v2.
Short specification:

- 650/600/216 MHz (CPU/DDR/AHB)
- 2x 10/100 Mbps Ethernet, passive PoE support
- 64/128 MB of RAM (DDR2)
- 16 MB of FLASH
- 2T2R 2.4 GHz with external PA, up to 29 dBm
- 2x internal 5 dBi omni antennas
- 4x LED, 1x button
- UART (JP1) header on PCB

Flash instruction under U-Boot, using UART:

1. tftp 0x80060000 lede-ar71xx-generic-ap90q-squashfs-sysupgrade
2. erase 0x9f050000 +$filesize
3. cp.b $fileaddr 0x9f050000 $filesize
4. setenv bootcmd "bootm 0x9f050000"
5. saveenv && reset

Flash instruction under vendor fimrware, using telnet/SSH:

1. Connect PC with 192.168.1.x address to WAN port
2. Power up device, enter failsafe mode with button (no LED indicator!)
3. Change root password and reboot (mount_root, passwd ..., reboot -f)
4. Upload lede-ar71xx-generic-ap90q-squashfs-sysupgrade.bin to /tmp using SCP
5. Connect PC with 192.168.188.x address to LAN port, SSH to 192.168.188.253
6. Invoke:
- cd /tmp
- fw_setenv bootcmd "bootm 0x9f050000"
- mtd erase firmware
- mtd -r write lede-ar71xx-generic-ap90q-squashfs-sysupgrade.bin firmware

Signed-off-by: Piotr Dymacz <pepe2k@gmail.com>
This commit is contained in:
Piotr Dymacz
2016-10-06 02:19:17 +02:00
committed by John Crispin
parent 16afa08d19
commit 01dda0659e
10 changed files with 163 additions and 7 deletions
Download Patch File Download Diff File Expand all files Collapse all files

15
target/linux/ar71xx/base-files/etc/board.d/01_leds
View File

@@ -57,6 +57,17 @@ ap147-010)
ucidef_set_led_switch "lan4" "LAN4" "ap147:green:lan4" "switch0" "0x02"
ucidef_set_led_wlan "wlan2g" "WLAN 2.4 GHz" "ap147:green:wlan-2g" "phy0tpt"
;;
ap90q|\
dr531)
ucidef_set_led_netdev "lan" "LAN" "$board:green:lan" "eth0"
ucidef_set_led_netdev "wan" "WAN" "$board:green:wan" "eth1"
case "$board" in
ap90q)
ucidef_set_led_wlan "wlan" "WLAN" "$board:green:wlan" "phy0tpt"
;;
esac
;;
bhr-4grv2)
ucidef_set_led_default "power" "POWER" "buffalo:green:power" "1"
ucidef_set_led_default "diag" "DIAG" "buffalo:red:diag" "0"
@@ -152,10 +163,6 @@ cr5000)
ucidef_set_led_wlan "wlan" "WLAN" "pcs:blue:wlan" "phy0tpt"
ucidef_set_led_usbdev "usb" "USB" "pcs:white:wps" "1-1"
;;
dr531)
ucidef_set_led_netdev "lan" "LAN" "$board:green:lan" "eth0"
ucidef_set_led_netdev "wan" "WAN" "$board:green:wan" "eth1"
;;
dragino2)
ucidef_set_led_wlan "wlan" "WLAN" "$board:red:wlan" "phy0tpt"
ucidef_set_led_netdev "lan" "LAN" "$board:red:lan" "eth0"

7
target/linux/ar71xx/base-files/etc/diag.sh
View File

@@ -47,6 +47,10 @@ get_status_led() {
tl-wpa8630)
status_led="$board:green:power"
;;
ap90q|\
gl-inet)
status_led="$board:green:lan"
;;
ap96)
status_led="$board:green:led2"
;;
@@ -168,9 +172,6 @@ get_status_led() {
f9k1115v2)
status_led="belkin:blue:status"
;;
gl-inet)
status_led="$board:green:lan"
;;
epg5000|\
esr1750)
status_led="$board:amber:power"