forked from Ivasoft/openwrt
ath79: split base-files into subtargets
While most of the target's contents are split into subtargets, the base-files are maintained for the target as a whole. However, OpenWrt already implements a mechanism that will use (and even prefer) files in the subtargets' directories. This can be exploited to make several scripts subtarget-specific and thus save some space (especially helpful for the tiny devices). The only script remaining in parent base-files is /etc/hotplug.d/ieee80211/00-wifi-migration, everything else is moved/split. Note that this will increase overall code lines, but reduce code per subtarget. base-files ipk size reduction: master (generic) 49135 B split (generic) 48533 B (- 0.6 kiB) split (tiny) 43337 B (- 5.7 kiB) split (nand) 44423 B (- 4.6 kiB) Tested on TL-WR1043ND v4 (generic) and TL-WR841N v12 (tiny). Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
This commit is contained in:
Adrian Schmutzler
committed by
John Crispin
John Crispin
parent
c36ef5970b
commit
0130022bae
@@ -1,161 +0,0 @@
|
||||
#!/bin/sh
|
||||
|
||||
[ -e /lib/firmware/$FIRMWARE ] && exit 0
|
||||
|
||||
. /lib/functions/caldata.sh
|
||||
|
||||
board=$(board_name)
|
||||
|
||||
case "$FIRMWARE" in
|
||||
"ath9k-eeprom-ahb-18100000.wmac.bin")
|
||||
case $board in
|
||||
avm,fritz4020)
|
||||
caldata_extract_reverse "urlader" 0x1541 0x440
|
||||
;;
|
||||
dlink,dir-825-c1|\
|
||||
dlink,dir-835-a1)
|
||||
caldata_extract "art" 0x1000 0x440
|
||||
ath9k_patch_mac $(mtd_get_mac_text "mac" 0x4)
|
||||
;;
|
||||
dlink,dir-842-c1|\
|
||||
dlink,dir-842-c2|\
|
||||
dlink,dir-842-c3|\
|
||||
dlink,dir-859-a1|\
|
||||
nec,wg1200cr|\
|
||||
wd,mynet-n750)
|
||||
caldata_extract "art" 0x1000 0x440
|
||||
ath9k_patch_mac $(mtd_get_mac_ascii devdata "wlan24mac")
|
||||
;;
|
||||
engenius,ecb1750)
|
||||
caldata_extract "art" 0x1000 0x440
|
||||
ath9k_patch_mac $(macaddr_add $(mtd_get_mac_ascii u-boot-env "athaddr") +1)
|
||||
;;
|
||||
engenius,epg5000|\
|
||||
iodata,wn-ac1167dgr|\
|
||||
iodata,wn-ac1600dgr|\
|
||||
iodata,wn-ac1600dgr2|\
|
||||
iodata,wn-ag300dgr|\
|
||||
sitecom,wlr-7100)
|
||||
caldata_extract "art" 0x1000 0x440
|
||||
ath9k_patch_mac $(mtd_get_mac_ascii u-boot-env ethaddr)
|
||||
;;
|
||||
nec,wg800hp)
|
||||
caldata_extract "art" 0x1000 0x440
|
||||
ath9k_patch_mac $(mtd_get_mac_text board_data 0x680)
|
||||
;;
|
||||
qihoo,c301)
|
||||
caldata_extract "radiocfg" 0x1000 0x440
|
||||
ath9k_patch_mac $(mtd_get_mac_ascii devdata "wlan24mac")
|
||||
;;
|
||||
zyxel,nbg6716)
|
||||
caldata_extract "art" 0x1000 0x440
|
||||
ath9k_patch_mac $(mtd_get_mac_ascii u-boot-env ethaddr)
|
||||
;;
|
||||
*)
|
||||
caldata_die "board $board is not supported yet"
|
||||
;;
|
||||
esac
|
||||
;;
|
||||
"ath9k-eeprom-pci-0000:00:00.0.bin")
|
||||
case $board in
|
||||
avm,fritz300e)
|
||||
caldata_extract_reverse "urloader" 0x1541 0x440
|
||||
;;
|
||||
buffalo,whr-g301n|\
|
||||
buffalo,wzr-hp-g302h-a1a0|\
|
||||
tplink,tl-wr841-v5|\
|
||||
tplink,tl-wr941-v4)
|
||||
caldata_extract "art" 0x1000 0xeb8
|
||||
;;
|
||||
buffalo,wzr-hp-g450h)
|
||||
caldata_extract "art" 0x1000 0x440
|
||||
;;
|
||||
dlink,dir-825-c1|\
|
||||
dlink,dir-835-a1)
|
||||
caldata_extract "art" 0x5000 0x440
|
||||
ath9k_patch_mac $(macaddr_add $(mtd_get_mac_text "mac" 0x18) 1)
|
||||
;;
|
||||
ocedo,raccoon|\
|
||||
tplink,tl-wdr3500-v1|\
|
||||
tplink,tl-wdr3600-v1|\
|
||||
tplink,tl-wdr4300-v1|\
|
||||
tplink,tl-wdr4900-v2|\
|
||||
winchannel,wb2000)
|
||||
caldata_extract "art" 0x5000 0x440
|
||||
;;
|
||||
netgear,wnr1000-v2|\
|
||||
netgear,wnr2000-v3|\
|
||||
netgear,wnr612-v2|\
|
||||
on,n150r|\
|
||||
pcs,cap324|\
|
||||
tplink,tl-mr3220-v1|\
|
||||
tplink,tl-mr3420-v1|\
|
||||
tplink,tl-wr2543-v1|\
|
||||
tplink,tl-wr740n-v1|\
|
||||
tplink,tl-wr740n-v3|\
|
||||
tplink,tl-wr741-v1|\
|
||||
tplink,tl-wr743nd-v1|\
|
||||
tplink,tl-wr841-v7|\
|
||||
tplink,tl-wr842n-v1|\
|
||||
ubnt,airrouter|\
|
||||
ubnt,bullet-m|\
|
||||
ubnt,nano-m|\
|
||||
ubnt,rocket-m)
|
||||
caldata_extract "art" 0x1000 0x1000
|
||||
;;
|
||||
pqi,air-pen)
|
||||
caldata_extract "art" 0x1000 0x7d2
|
||||
;;
|
||||
ubnt,unifi)
|
||||
caldata_extract "art" 0x1000 0x800
|
||||
;;
|
||||
wd,mynet-n750)
|
||||
caldata_extract "art" 0x5000 0x440
|
||||
ath9k_patch_mac $(mtd_get_mac_ascii devdata "wlan5mac")
|
||||
;;
|
||||
wd,mynet-wifi-rangeextender)
|
||||
caldata_extract "art" 0x1000 0x1000
|
||||
ath9k_patch_mac $(nvram get wl0_hwaddr)
|
||||
;;
|
||||
*)
|
||||
caldata_die "board $board is not supported yet"
|
||||
;;
|
||||
esac
|
||||
;;
|
||||
"ath9k-eeprom-pci-0000:00:11.0.bin")
|
||||
case $board in
|
||||
buffalo,wzr-hp-ag300h|\
|
||||
netgear,wndr3700|\
|
||||
netgear,wndr3700v2|\
|
||||
netgear,wndr3800|\
|
||||
netgear,wndr3800ch)
|
||||
caldata_extract "art" 0x1000 0xeb8
|
||||
;;
|
||||
dlink,dir-825-b1)
|
||||
caldata_extract "caldata" 0x1000 0xeb8
|
||||
ath9k_patch_mac_crc $(mtd_get_mac_text "caldata" 0xffa0) 0x20c
|
||||
;;
|
||||
*)
|
||||
caldata_die "board $board is not supported yet"
|
||||
;;
|
||||
esac
|
||||
;;
|
||||
"ath9k-eeprom-pci-0000:00:12.0.bin")
|
||||
case $board in
|
||||
buffalo,wzr-hp-ag300h|\
|
||||
netgear,wndr3700|\
|
||||
netgear,wndr3700v2|\
|
||||
netgear,wndr3800|\
|
||||
netgear,wndr3800ch)
|
||||
caldata_extract "art" 0x5000 0xeb8
|
||||
;;
|
||||
dlink,dir-825-b1)
|
||||
caldata_extract "caldata" 0x5000 0xeb8
|
||||
ath9k_patch_mac_crc $(macaddr_add $(mtd_get_mac_text "caldata" 0xffb4) 1) 0x20c
|
||||
;;
|
||||
*)
|
||||
caldata_die "board $board is not supported yet"
|
||||
;;
|
||||
esac
|
||||
;;
|
||||
esac
|
||||
@@ -1,167 +0,0 @@
|
||||
#!/bin/sh
|
||||
|
||||
[ -e /lib/firmware/$FIRMWARE ] && exit 0
|
||||
|
||||
. /lib/functions/caldata.sh
|
||||
. /lib/functions/k2t.sh
|
||||
|
||||
board=$(board_name)
|
||||
|
||||
case "$FIRMWARE" in
|
||||
"ath10k/cal-pci-0000:00:00.0.bin")
|
||||
case $board in
|
||||
comfast,cf-wr650ac-v1|\
|
||||
comfast,cf-wr650ac-v2|\
|
||||
yuncore,a770)
|
||||
caldata_extract "art" 0x5000 0x844
|
||||
;;
|
||||
devolo,dvl1200e|\
|
||||
devolo,dvl1200i|\
|
||||
devolo,dvl1750c|\
|
||||
devolo,dvl1750e|\
|
||||
devolo,dvl1750i|\
|
||||
devolo,dvl1750x)
|
||||
caldata_extract "art" 0x5000 0x844
|
||||
ath10k_patch_mac $(macaddr_add $(mtd_get_mac_binary art 0x0) -1)
|
||||
;;
|
||||
dlink,dir-859-a1)
|
||||
caldata_extract "art" 0x5000 0x844
|
||||
ath10k_patch_mac $(mtd_get_mac_ascii devdata "wlan5mac")
|
||||
;;
|
||||
elecom,wrc-1750ghbk2-i)
|
||||
caldata_extract "art" 0x5000 0x844
|
||||
;;
|
||||
engenius,ecb1750)
|
||||
caldata_extract "art" 0x5000 0x844
|
||||
ath10k_patch_mac $(mtd_get_mac_ascii u-boot-env athaddr)
|
||||
;;
|
||||
engenius,epg5000|\
|
||||
iodata,wn-ac1167dgr|\
|
||||
iodata,wn-ac1600dgr2|\
|
||||
sitecom,wlr-7100)
|
||||
caldata_extract "art" 0x5000 0x844
|
||||
ath10k_patch_mac $(macaddr_add $(mtd_get_mac_ascii u-boot-env ethaddr) +1)
|
||||
;;
|
||||
engenius,ews511ap)
|
||||
caldata_extract "art" 0x5000 0x844
|
||||
ath10k_patch_mac $(macaddr_add $(cat /sys/class/net/eth0/address) +1)
|
||||
;;
|
||||
glinet,gl-ar750|\
|
||||
glinet,gl-ar750s)
|
||||
caldata_extract "art" 0x5000 0x844
|
||||
ath10k_patch_mac $(macaddr_add $(mtd_get_mac_binary art 0x0) +1)
|
||||
;;
|
||||
glinet,gl-x750)
|
||||
caldata_extract "art" 0x5000 0x844
|
||||
ath10k_patch_mac $(macaddr_add $(mtd_get_mac_binary art 0x0) +2)
|
||||
;;
|
||||
nec,wg800hp)
|
||||
caldata_extract "art" 0x5000 0x844
|
||||
ath10k_patch_mac $(mtd_get_mac_text board_data 0x880)
|
||||
;;
|
||||
ocedo,koala|\
|
||||
ocedo,ursus)
|
||||
caldata_extract "art" 0x5000 0x844
|
||||
ath10k_patch_mac $(mtd_get_mac_binary art 0xc)
|
||||
;;
|
||||
openmesh,om5p-ac-v2)
|
||||
caldata_extract "art" 0x5000 0x844
|
||||
ath10k_patch_mac $(macaddr_add $(cat /sys/class/net/eth0/address) +16)
|
||||
;;
|
||||
qihoo,c301)
|
||||
caldata_extract "radiocfg" 0x5000 0x844
|
||||
ath10k_patch_mac $(mtd_get_mac_ascii devdata wlan5mac)
|
||||
;;
|
||||
tplink,archer-a7-v5|\
|
||||
tplink,archer-c2-v3|\
|
||||
tplink,archer-c7-v4|\
|
||||
tplink,archer-c7-v5|\
|
||||
tplink,archer-c25-v1)
|
||||
caldata_extract "art" 0x5000 0x844
|
||||
ath10k_patch_mac $(macaddr_add $(mtd_get_mac_binary info 0x8) -1)
|
||||
;;
|
||||
tplink,archer-c5-v1|\
|
||||
tplink,archer-c7-v2)
|
||||
caldata_extract "art" 0x5000 0x844
|
||||
ath10k_patch_mac $(macaddr_add $(mtd_get_mac_binary u-boot 0x1fc00) -1)
|
||||
;;
|
||||
tplink,archer-d50-v1)
|
||||
caldata_extract "art" 0x5000 0x844
|
||||
ath10k_patch_mac $(macaddr_add $(mtd_get_mac_binary romfile 0xf100) +2)
|
||||
;;
|
||||
tplink,re350k-v1)
|
||||
caldata_extract "art" 0x5000 0x844
|
||||
ath10k_patch_mac $(macaddr_add $(mtd_get_mac_binary config 0x10008) +2)
|
||||
;;
|
||||
tplink,re355-v1|\
|
||||
tplink,re450-v1)
|
||||
caldata_extract "art" 0x5000 0x844
|
||||
ath10k_patch_mac $(macaddr_add $(cat /sys/class/net/eth0/address) -2)
|
||||
;;
|
||||
tplink,re450-v2)
|
||||
caldata_extract "art" 0x5000 0x844
|
||||
ath10k_patch_mac $(macaddr_add $(mtd_get_mac_binary info 0x8) +1)
|
||||
;;
|
||||
ubnt,unifiac-lite|\
|
||||
ubnt,unifiac-lr|\
|
||||
ubnt,unifiac-mesh|\
|
||||
ubnt,unifiac-mesh-pro|\
|
||||
ubnt,lap-120|\
|
||||
ubnt,nanobeam-ac|\
|
||||
ubnt,nanostation-ac|\
|
||||
ubnt,nanostation-ac-loco|\
|
||||
ubnt,unifiac-pro)
|
||||
caldata_extract "EEPROM" 0x5000 0x844
|
||||
;;
|
||||
zyxel,nbg6716)
|
||||
caldata_extract "art" 0x5000 0x844
|
||||
ath10kcal_patch_mac $(macaddr_add $(mtd_get_mac_ascii u-boot-env ethaddr) +1)
|
||||
;;
|
||||
esac
|
||||
;;
|
||||
"ath10k/pre-cal-pci-0000:00:00.0.bin")
|
||||
case $board in
|
||||
comfast,cf-e313ac)
|
||||
caldata_extract "art" 0x5000 0x2f20
|
||||
ath10k_patch_mac $(mtd_get_mac_binary art 0x6)
|
||||
ln -sf /lib/firmware/ath10k/pre-cal-pci-0000\:00\:00.0.bin \
|
||||
/lib/firmware/ath10k/QCA9888/hw2.0/board.bin
|
||||
rm /lib/firmware/ath10k/QCA9888/hw2.0/board-2.bin
|
||||
;;
|
||||
dlink,dir-842-c1|\
|
||||
dlink,dir-842-c2|\
|
||||
dlink,dir-842-c3|\
|
||||
nec,wg1200cr)
|
||||
caldata_extract "art" 0x5000 0x2f20
|
||||
ath10k_patch_mac $(mtd_get_mac_ascii devdata wlan5mac)
|
||||
ln -sf /lib/firmware/ath10k/pre-cal-pci-0000\:00\:00.0.bin \
|
||||
/lib/firmware/ath10k/QCA9888/hw2.0/board.bin
|
||||
;;
|
||||
netgear,ex6400|\
|
||||
netgear,ex7300)
|
||||
caldata_extract "caldata" 0x5000 0x2f20
|
||||
ath10k_patch_mac $(mtd_get_mac_binary caldata 0xc)
|
||||
;;
|
||||
phicomm,k2t)
|
||||
caldata_extract "art" 0x5000 0x2f20
|
||||
ath10k_patch_mac $(k2t_get_mac "5g_mac")
|
||||
ln -sf /lib/firmware/ath10k/pre-cal-pci-0000\:00\:00.0.bin \
|
||||
/lib/firmware/ath10k/QCA9888/hw2.0/board.bin
|
||||
;;
|
||||
tplink,archer-c58-v1|\
|
||||
tplink,archer-c59-v1|\
|
||||
tplink,archer-c59-v2|\
|
||||
tplink,archer-c60-v1|\
|
||||
tplink,archer-c60-v2|\
|
||||
tplink,archer-c6-v2)
|
||||
caldata_extract "art" 0x5000 0x2f20
|
||||
ath10k_patch_mac $(macaddr_add $(mtd_get_mac_binary mac 0x8) -1)
|
||||
ln -sf /lib/firmware/ath10k/pre-cal-pci-0000\:00\:00.0.bin \
|
||||
/lib/firmware/ath10k/QCA9888/hw2.0/board.bin
|
||||
;;
|
||||
esac
|
||||
;;
|
||||
*)
|
||||
exit 1
|
||||
;;
|
||||
esac
|
||||
@@ -1,45 +0,0 @@
|
||||
#!/bin/ash
|
||||
|
||||
[ "$ACTION" = "add" ] || exit 0
|
||||
|
||||
PHYNBR=${DEVPATH##*/phy}
|
||||
|
||||
[ -n $PHYNBR ] || exit 0
|
||||
|
||||
. /lib/functions.sh
|
||||
. /lib/functions/system.sh
|
||||
. /lib/functions/k2t.sh
|
||||
|
||||
board=$(board_name)
|
||||
|
||||
case "$board" in
|
||||
adtran,bsap1800-v2|\
|
||||
adtran,bsap1840)
|
||||
macaddr_add "$(mtd_get_mac_binary 'Board data' 2)" $(($PHYNBR * 8 + 1)) > /sys${DEVPATH}/macaddress
|
||||
;;
|
||||
iodata,wn-ac1600dgr)
|
||||
# There is no eeprom data for 5 GHz wlan in "art" partition
|
||||
# which would allow to patch the macaddress
|
||||
[ "$PHYNBR" -eq 0 ] && \
|
||||
macaddr_add "$(mtd_get_mac_ascii u-boot-env ethaddr)" 1 > /sys${DEVPATH}/macaddress
|
||||
;;
|
||||
iodata,wn-ag300dgr)
|
||||
# There is no eeprom data for 5 GHz wlan in "art" partition
|
||||
# which would allow to patch the macaddress
|
||||
[ "$PHYNBR" -eq 1 ] && \
|
||||
macaddr_add "$(mtd_get_mac_ascii u-boot-env ethaddr)" 1 > /sys${DEVPATH}/macaddress
|
||||
;;
|
||||
phicomm,k2t)
|
||||
# The K2T factory firmware does use LAN mac address as the 2.4G wifi mac address
|
||||
[ "$PHYNBR" -eq 1 ] && \
|
||||
k2t_get_mac "lan_mac" > /sys${DEVPATH}/macaddress
|
||||
;;
|
||||
trendnet,tew-823dru)
|
||||
# set the 2.4G interface mac address to LAN MAC
|
||||
[ "$PHYNBR" -eq 1 ] && \
|
||||
mtd_get_mac_text mac 4 > /sys${DEVPATH}/macaddress
|
||||
# set the 5G interface mac address to WAN MAC + 1
|
||||
[ "$PHYNBR" -eq 0 ] && \
|
||||
macaddr_add "$(mtd_get_mac_text mac 0x18)" 1 > /sys${DEVPATH}/macaddress
|
||||
;;
|
||||
esac
|
||||
Reference in New Issue
Block a user