SW/openwrt
2
0
Fork 0
forked from Ivasoft/openwrt
Code Pull Requests Activity

ath79: move small-flash Engenius boards to tiny

Browse Source 
This moves some of the Engenius boards from generic to tiny:

 - EAP350 v1
 - ECB350 v1
 - ENH202 v1

For these, factory.bin builds are already failing on master
branch because of the unique situation for these boards:

 - 8 MB flash
 - an extra "failsafe" image for recovery
 - TFTP does not work (barely possible with 600 MTU)
 - bootloader loads image from a longer flash offset
 - 1 eraseblock each needed for OKLI kernel loader and fake rootfs
 - using mtd-concat to make use of remaining space...

The manual alternative would be removing the failsafe partition.
However this comes with the risk of extremely difficult recovery
if a flash ever fails because TFTP on the bootloader is bugged.
Signed-off-by: Michael Pratt <mcpratt@pm.me>
[improve commit message]
Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
This commit is contained in:
Michael Pratt
2021-01-01 16:48:52 -05:00
committed by Adrian Schmutzler
parent ecded5bf09
commit 0070650df4
9 changed files with 104 additions and 100 deletions
Download Patch File Download Diff File Expand all files Collapse all files

5
target/linux/ath79/generic/base-files/etc/hotplug.d/firmware/10-ath9k-eeprom
View File

@@ -74,10 +74,7 @@ case "$FIRMWARE" in
avm,fritz300e)
caldata_extract_reverse "urloader" 0x1541 0x440
;;
buffalo,wzr-hp-g302h-a1a0|\
engenius,eap350-v1|\
engenius,ecb350-v1|\
engenius,enh202-v1)
buffalo,wzr-hp-g302h-a1a0)
caldata_extract "art" 0x1000 0xeb8
;;
buffalo,wzr-hp-g450h|\