diff --git a/libsigrokdecode4DSL/decoders/cc1101/__init__.py b/libsigrokdecode4DSL/decoders/cc1101/__init__.py
new file mode 100644
index 00000000..68fc7987
--- /dev/null
+++ b/libsigrokdecode4DSL/decoders/cc1101/__init__.py
@@ -0,0 +1,28 @@
+##
+## This file is part of the libsigrokdecode project.
+##
+## Copyright (C) 2019 Marco Geisler <m-sigrok@mageis.de>
+##
+## This program is free software; you can redistribute it and/or modify
+## it under the terms of the GNU General Public License as published by
+## the Free Software Foundation; either version 2 of the License, or
+## (at your option) any later version.
+##
+## This program is distributed in the hope that it will be useful,
+## but WITHOUT ANY WARRANTY; without even the implied warranty of
+## MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+## GNU General Public License for more details.
+##
+## You should have received a copy of the GNU General Public License
+## along with this program; if not, see <http://www.gnu.org/licenses/>.
+##
+
+'''
+This decoder stacks on top of the 'spi' PD and decodes the protocol spoken
+by the Texas Instruments low-power sub-1GHz RF transceiver chips.
+
+Details:
+http://www.ti.com/lit/ds/symlink/cc1101.pdf
+'''
+
+from .pd import Decoder
diff --git a/libsigrokdecode4DSL/decoders/cc1101/lists.py b/libsigrokdecode4DSL/decoders/cc1101/lists.py
new file mode 100644
index 00000000..dfb9b07f
--- /dev/null
+++ b/libsigrokdecode4DSL/decoders/cc1101/lists.py
@@ -0,0 +1,115 @@
+##
+## This file is part of the libsigrokdecode project.
+##
+## Copyright (C) 2019 Marco Geisler <m-sigrok@mageis.de>
+##
+## This program is free software; you can redistribute it and/or modify
+## it under the terms of the GNU General Public License as published by
+## the Free Software Foundation; either version 2 of the License, or
+## (at your option) any later version.
+##
+## This program is distributed in the hope that it will be useful,
+## but WITHOUT ANY WARRANTY; without even the implied warranty of
+## MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+## GNU General Public License for more details.
+##
+## You should have received a copy of the GNU General Public License
+## along with this program; if not, see <http://www.gnu.org/licenses/>.
+##
+
+regs = {
+#   addr: 'name'
+    0x00: 'IOCFG2',
+    0x01: 'IOCFG1',
+    0x02: 'IOCFG0',
+    0x03: 'FIFOTHR',
+    0x04: 'SYNC1',
+    0x05: 'SYNC0',
+    0x06: 'PKTLEN',
+    0x07: 'PKTCTRL1',
+    0x08: 'PKTCTRL0',
+    0x09: 'ADDR',
+    0x0A: 'CHANNR',
+    0x0B: 'FSCTRL1',
+    0x0C: 'FSCTRL0',
+    0x0D: 'FREQ2',
+    0x0E: 'FREQ1',
+    0x0F: 'FREQ0',
+    0x10: 'MDMCFG4',
+    0x11: 'MDMCFG3',
+    0x12: 'MDMCFG2',
+    0x13: 'MDMCFG1',
+    0x14: 'MDMCFG0',
+    0x15: 'DEVIATN',
+    0x16: 'MCSM2',
+    0x17: 'MCSM1',
+    0x18: 'MCSM0',
+    0x19: 'FOCCFG',
+    0x1A: 'BSCFG',
+    0x1B: 'AGCTRL2',
+    0x1C: 'AGCTRL1',
+    0x1D: 'AGCTRL0',
+    0x1E: 'WOREVT1',
+    0x1F: 'WOREVT0',
+    0x20: 'WORCTRL',
+    0x21: 'FREND1',
+    0x22: 'FREND0',
+    0x23: 'FSCAL3',
+    0x24: 'FSCAL2',
+    0x25: 'FSCAL1',
+    0x26: 'FSCAL0',
+    0x27: 'RCCTRL1',
+    0x28: 'RCCTRL0',
+    0x29: 'FSTEST',
+    0x2A: 'PTEST',
+    0x2B: 'AGCTEST',
+    0x2C: 'TEST2',
+    0x2D: 'TEST1',
+    0x2E: 'TEST0',
+    0x30: 'PARTNUM',
+    0x31: 'VERSION',
+    0x32: 'FREQEST',
+    0x33: 'LQI',
+    0x34: 'RSSI',
+    0x35: 'MARCSTATE',
+    0x36: 'WORTIME1',
+    0x37: 'WORTIME0',
+    0x38: 'PKTSTATUS',
+    0x39: 'VCO_VC_DAC',
+    0x3A: 'TXBYTES',
+    0x3B: 'RXBYTES',
+    0x3C: 'RCCTRL1_STATUS',
+    0x3D: 'RCCTRL0_STATUS',
+    0x3E: 'PATABLE',
+    0x3F: 'FIFO'
+}
+
+strobes = {
+#   addr: 'name'
+    0x30: 'SRES',
+    0x31: 'SFSTXON',
+    0x32: 'SXOFF',
+    0x33: 'SCAL',
+    0x34: 'SRX',
+    0x35: 'STX',
+    0x36: 'SIDLE',
+    0x37: '',
+    0x38: 'SWOR',
+    0x39: 'SPWD',
+    0x3A: 'SFRX',
+    0x3B: 'SFTX',
+    0x3C: 'SWORRST',
+    0x3D: 'SNOP'
+}
+
+status_reg_states = {
+#   value: 'state name'
+    0b000: 'IDLE',
+    0b001: 'RX',
+    0b010: 'TX',
+    0b011: 'FSTXON',
+    0b100: 'CALIBRATE',
+    0b101: 'SETTLING',
+    0b110: 'RXFIFO_OVERFLOW',
+    0b111: 'TXFIFO_OVERFLOW'
+}
diff --git a/libsigrokdecode4DSL/decoders/cc1101/pd.py b/libsigrokdecode4DSL/decoders/cc1101/pd.py
new file mode 100644
index 00000000..156d4ce1
--- /dev/null
+++ b/libsigrokdecode4DSL/decoders/cc1101/pd.py
@@ -0,0 +1,293 @@
+##
+## This file is part of the libsigrokdecode project.
+##
+## Copyright (C) 2019 Marco Geisler <m-sigrok@mageis.de>
+##
+## This program is free software; you can redistribute it and/or modify
+## it under the terms of the GNU General Public License as published by
+## the Free Software Foundation; either version 2 of the License, or
+## (at your option) any later version.
+##
+## This program is distributed in the hope that it will be useful,
+## but WITHOUT ANY WARRANTY; without even the implied warranty of
+## MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+## GNU General Public License for more details.
+##
+## You should have received a copy of the GNU General Public License
+## along with this program; if not, see <http://www.gnu.org/licenses/>.
+##
+
+import sigrokdecode as srd
+from collections import namedtuple
+from .lists import *
+
+ANN_STROBE, ANN_SINGLE_READ, ANN_SINGLE_WRITE, ANN_BURST_READ, \
+    ANN_BURST_WRITE, ANN_STATUS_READ, ANN_STATUS, ANN_WARN = range(8)
+
+Pos = namedtuple('Pos', ['ss', 'es'])
+Data = namedtuple('Data', ['mosi', 'miso'])
+
+class Decoder(srd.Decoder):
+    api_version = 3
+    id = 'cc1101'
+    name = 'CC1101'
+    longname = 'Texas Instruments CC1101'
+    desc = 'Low-power sub-1GHz RF transceiver chip.'
+    license = 'gplv2+'
+    inputs = ['spi']
+    outputs = []
+    tags = ['IC', 'Wireless/RF']
+    annotations = (
+        ('strobe', 'Command strobe'),
+        ('single_read', 'Single register read'),
+        ('single_write', 'Single register write'),
+        ('burst_read', 'Burst register read'),
+        ('burst_write', 'Burst register write'),
+        ('status', 'Status register'),
+        ('warning', 'Warning'),
+    )
+    annotation_rows = (
+        ('cmd', 'Commands', (ANN_STROBE,)),
+        ('data', 'Data', (ANN_SINGLE_READ, ANN_SINGLE_WRITE, ANN_BURST_READ,
+                            ANN_BURST_WRITE, ANN_STATUS_READ)),
+        ('status', 'Status register', (ANN_STATUS,)),
+        ('warnings', 'Warnings', (ANN_WARN,)),
+    )
+
+    def __init__(self):
+        self.reset()
+
+    def reset(self):
+        self.next()
+        self.requirements_met = True
+        self.cs_was_released = False
+
+    def start(self):
+        self.out_ann = self.register(srd.OUTPUT_ANN)
+
+    def warn(self, pos, msg):
+        '''Put a warning message 'msg' at 'pos'.'''
+        self.put(pos.ss, pos.es, self.out_ann, [ANN_WARN, [msg]])
+
+    def putp(self, pos, ann, msg):
+        '''Put an annotation message 'msg' at 'pos'.'''
+        self.put(pos.ss, pos.es, self.out_ann, [ann, [msg]])
+
+    def putp2(self, pos, ann, msg1, msg2):
+        '''Put an annotation message 'msg' at 'pos'.'''
+        self.put(pos.ss, pos.es, self.out_ann, [ann, [msg1, msg2]])
+
+    def next(self):
+        '''Resets the decoder after a complete command was decoded.'''
+        # 'True' for the first byte after CS# went low.
+        self.first = True
+
+        # The current command, and the minimum and maximum number
+        # of data bytes to follow.
+        self.cmd = None
+        self.min = 0
+        self.max = 0
+
+        # Used to collect the bytes after the command byte
+        # (and the start/end sample number).
+        self.mb = []
+        self.ss_mb = -1
+        self.es_mb = -1
+
+    def mosi_bytes(self):
+        '''Returns the collected MOSI bytes of a multi byte command.'''
+        return [b.mosi for b in self.mb]
+
+    def miso_bytes(self):
+        '''Returns the collected MISO bytes of a multi byte command.'''
+        return [b.miso for b in self.mb]
+
+    def decode_command(self, pos, b):
+        '''Decodes the command byte 'b' at position 'pos' and prepares
+        the decoding of the following data bytes.'''
+        c = self.parse_command(b)
+        if c is None:
+            self.warn(pos, 'unknown command')
+            return
+
+        self.cmd, self.dat, self.min, self.max = c
+
+        if self.cmd == 'Strobe':
+            self.putp(pos, ANN_STROBE, self.format_command())
+        else:
+            # Don't output anything now, the command is merged with
+            # the data bytes following it.
+            self.ss_mb = pos.ss
+
+    def format_command(self):
+        '''Returns the label for the current command.'''
+        if self.cmd in ('Read', 'Burst read', 'Write', 'Burst write', 'Status read'):
+            return self.cmd
+        if self.cmd == 'Strobe':
+            reg = strobes.get(self.dat, 'unknown strobe')
+            return '{} {}'.format(self.cmd, reg)
+        else:
+            return 'TODO Cmd {}'.format(self.cmd)
+
+    def parse_command(self, b):
+        '''Parses the command byte.
+
+        Returns a tuple consisting of:
+        - the name of the command
+        - additional data needed to dissect the following bytes
+        - minimum number of following bytes
+        - maximum number of following bytes (None for infinite)
+        '''
+
+        addr = b & 0x3F
+        if (addr < 0x30) or (addr == 0x3E) or (addr == 0x3F):
+            if (b & 0xC0) == 0x00:
+                return ('Write', addr, 1, 1)
+            if (b & 0xC0) == 0x40:
+                return ('Burst write', addr, 1, 99999)
+            if (b & 0xC0) == 0x80:
+                return ('Read', addr, 1, 1)
+            if (b & 0xC0) == 0xC0:
+                return ('Burst read', addr, 1, 99999)
+            else:
+                self.warn(pos, 'unknown address/command combination')
+        else:
+            if (b & 0x40) == 0x00:
+                return ('Strobe', addr, 0, 0)
+            if (b & 0xC0) == 0xC0:
+                return ('Status read', addr, 1, 99999)
+            else:
+                self.warn(pos, 'unknown address/command combination')
+
+    def decode_reg(self, pos, ann, regid, data):
+        '''Decodes a register.
+
+        pos   -- start and end sample numbers of the register
+        ann   -- the annotation number that is used to output the register.
+        regid -- may be either an integer used as a key for the 'regs'
+                 dictionary, or a string directly containing a register name.'
+        data  -- the register content.
+        '''
+
+        if type(regid) == int:
+            # Get the name of the register.
+            if regid not in regs:
+                self.warn(pos, 'unknown register')
+                return
+            name = '{} ({:02X})'.format(regs[regid], regid)
+        else:
+            name = regid
+
+        if regid == 'STATUS' and ann == ANN_STATUS:
+            label = 'Status'
+            self.decode_status_reg(pos, ann, data, label)
+        else:
+            if self.cmd in ('Write', 'Read', 'Status read', 'Burst read', 'Burst write'):
+                label = '{}: {}'.format(self.format_command(), name)
+            else:
+                label = 'Reg ({}) {}'.format(self.cmd, name)
+            self.decode_mb_data(pos, ann, data, label)
+
+    def decode_status_reg(self, pos, ann, data, label):
+        '''Decodes the data bytes 'data' of a status register at position
+        'pos'. The decoded data is prefixed with 'label'.'''
+        status = data[0]
+        # bit 7 --> CHIP_RDYn
+        if status & 0b10000000 == 0b10000000:
+            longtext_chiprdy = 'CHIP_RDYn is high! '
+        else:
+            longtext_chiprdy = ''
+        # bits 6:4 --> STATE
+        state = (status & 0x70) >> 4
+        longtext_state = 'STATE is {}, '.format(status_reg_states[state])
+        # bits 3:0 --> FIFO_BYTES_AVAILABLE
+        fifo_bytes = status & 0x0F
+        if self.cmd in ('Single read', 'Status read', 'Burst read'):
+            longtext_fifo = '{} bytes available in RX FIFO'.format(fifo_bytes)
+        else:
+            longtext_fifo = '{} bytes free in TX FIFO'.format(fifo_bytes)
+
+        text = '{} = {:02X}'.format(label, status)
+        longtext = ''.join([text, '; ', longtext_chiprdy, longtext_state, longtext_fifo])
+        self.putp2(pos, ann, longtext, text)
+
+    def decode_mb_data(self, pos, ann, data, label):
+        '''Decodes the data bytes 'data' of a multibyte command at position
+        'pos'. The decoded data is prefixed with 'label'.'''
+
+        def escape(b):
+            return '{:02X}'.format(b)
+
+        data = ' '.join([escape(b) for b in data])
+        text = '{} = {}'.format(label, data)
+        self.putp(pos, ann, text)
+
+    def finish_command(self, pos):
+        '''Decodes the remaining data bytes at position 'pos'.'''
+
+        if self.cmd == 'Write':
+            self.decode_reg(pos, ANN_SINGLE_WRITE, self.dat, self.mosi_bytes())
+        elif self.cmd == 'Burst write':
+            self.decode_reg(pos, ANN_BURST_WRITE, self.dat, self.mosi_bytes())
+        elif self.cmd == 'Read':
+            self.decode_reg(pos, ANN_SINGLE_READ, self.dat, self.miso_bytes())
+        elif self.cmd == 'Burst read':
+            self.decode_reg(pos, ANN_BURST_READ, self.dat, self.miso_bytes())
+        elif self.cmd == 'Strobe':
+            self.decode_reg(pos, ANN_STROBE, self.dat, self.mosi_bytes())
+        elif self.cmd == 'Status read':
+            self.decode_reg(pos, ANN_STATUS_READ, self.dat, self.miso_bytes())
+        else:
+            self.warn(pos, 'unhandled command')
+
+    def decode(self, ss, es, data):
+        if not self.requirements_met:
+            return
+
+        ptype, data1, data2 = data
+
+        if ptype == 'CS-CHANGE':
+            if data1 is None:
+                if data2 is None:
+                    self.requirements_met = False
+                    raise ChannelError('CS# pin required.')
+                elif data2 == 1:
+                    self.cs_was_released = True
+
+            if data1 == 0 and data2 == 1:
+                # Rising edge, the complete command is transmitted, process
+                # the bytes that were sent after the command byte.
+                if self.cmd:
+                    # Check if we got the minimum number of data bytes
+                    # after the command byte.
+                    if len(self.mb) < self.min:
+                        self.warn((ss, ss), 'missing data bytes')
+                    elif self.mb:
+                        self.finish_command(Pos(self.ss_mb, self.es_mb))
+
+                self.next()
+                self.cs_was_released = True
+
+        elif ptype == 'DATA' and self.cs_was_released:
+            mosi, miso = data1, data2
+            pos = Pos(ss, es)
+
+            if miso is None or mosi is None:
+                self.requirements_met = False
+                raise ChannelError('Both MISO and MOSI pins required.')
+
+            if self.first:
+                self.first = False
+                # First MOSI byte is always the command.
+                self.decode_command(pos, mosi)
+                # First MISO byte is always the status register.
+                self.decode_reg(pos, ANN_STATUS, 'STATUS', [miso])
+            else:
+                if not self.cmd or len(self.mb) >= self.max:
+                    self.warn(pos, 'excess byte')
+                else:
+                    # Collect the bytes after the command byte.
+                    if self.ss_mb == -1:
+                        self.ss_mb = ss
+                    self.es_mb = es
+                    self.mb.append(Data(mosi, miso))